|
卧式气液两相分离器在线计算程序，基于Souders Brown公式，对有除雾器或没有除雾器的卧式气液分离器，进行尺寸设计和计算，K值可通过GPSA方法、液滴尺寸方法和用户输入来获得。This program does the design sizing and calculation for a horizontal gas liquid separator with or without Mesh Pad based on Souders Brown Equation. K Values can be estimated based on GPSA method, Droplet Size and on user input.
数据输入(Data Input)气体(Vapor)
质量流量(Mass Flowrate)
Kg/h
密度(Density)
Kg/m
液体(Liquid)
质量流量(Mass Flowrate)
Kg/h
密度(Density)
Kg/m
低液位(Low Liquid Level)
mm
时间(Time)
停留时间(Holdup Time)
min
缓冲时间(Surge Time)
min
K值(K Value)
选择(Select)
除雾器(Mesh Pad)
K值(K-Value)
m/s
出口速度(Terminal Velocity):Vt
m/s
设计速度(Design Velocity)
% of Vt
管嘴(Nozzle Sizing)
进料ρV(Feed In, ρV)
Kg/m.s
出口气体ρV(Vapor Out, ρV)
Kg/m.s
出口液体VMax(Liquid Out, VMax)
m/s
L/D比(L/D Ratio)
所需L/D(L/D Required)
解决方案Solution
单位Unit
基本配置 直径Diameter (ID)1100mm 长度Length (L)3300mm Hv300mm HHLL to HNLL325mm HNLL to HLLL325mm HLLL150mm 管嘴配置 物料进口(Feed Inlet)200mm 气体出口(Vapor Outlet)200mm 液体出口(Liquid Outlet)40mm 最小水平长度(Minimum Horizontal Length) V-L分离所需(for V-L Separation)423mm 停留和缓冲所需(Holdup & Surge)1872mm |
|关于我们|网站地图|手机版|无图版|油气储运网
(鲁ICP备11007657号-3)
GMT+8, 2023-1-22 08:01 , Processed in 0.053535 second(s), 8 queries , Gzip On, Apc On.
Powered by Discuz! X3.4
© 2001-2018 Comsenz Inc.
