|
此压缩机在线计算程序可计算从入口压力压缩到出口指定压力，在给定活塞直径、连杆直径、冲程长度和转速的情况下，压缩气体混合物所需的压缩机容量和功率。Estimates capacity and power required for compressing a gas mixture from an Inlet Pressure to Desired Outlet pressure for a given cylinder diameter, rod diameter, stroke length and RPM.
数据输入Data
入口压力Pressure In (P1)
Bar A
入口温度Temperature In (T1)
° C
出口压力Pressure Out (P2)
Bar A
多变效率Polytropic Efficiency (ηPoly)
%
压缩机数据Compressor Data
汽缸直径Cylinder Diameter (ID)
mm
连杆直径Rod Diameter (OD)
mm
冲程长度Stroke Length (S)
mm
转速Speed
RPM
机械效率Mechanical Efficiency (ηMech)
%
间隙Clearance (C)
%
损耗因子Loss Factor (L)
%
汽缸作用类别Cylinder Acting 计算结果Result 压缩比Compression Ratio7.50 出口温度Temperature Out109.17° C Z (平均值Average)0.9661 活塞排量Piston Displacement0.0179m/s 容积效率Volumetric Efficiency77.53% 实际流量Actual Flow0.0139m/s 气体流量Gas Flow0.0139m/s 功率Power6.31kW 总功率与机械效率的比值Total Power / ηMech7.89kW 特性Properties
选择要使用的模式Select
临界压力Critical Pressure (Pc)
Bar A
临界温度Critical Temperature (Tc)
° C
偏心因子Accentric Factor (ω)
摩尔质量Molecular Weight
状态方程Equation of State
组分Composition
输入方式Input Basis
请先选择下面左侧的组分号，然后选择右面的化学品名字，然后在下表中输入摩尔或质量First select Component No., then select Chemical Name
|
|关于我们|网站地图|手机版|无图版|油气储运网
(鲁ICP备11007657号-3)
GMT+8, 2023-1-24 01:05 , Processed in 0.036391 second(s), 10 queries , Gzip On, Apc On.
Powered by Discuz! X3.4
© 2001-2018 Comsenz Inc.
